Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Valve Noise 200 1991

posted by  Wolfe111 on  Thu May 7 05:19 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Jan 12 13:24 CST 2012
[RELATED]

Hi;
I just bought a new wagon with about 220Km on it.
The valves are noisy, so I checked the clearances. All were good except one, which has a clearance way outside the spec of .860 mm. I replaced the existing shim of 4.3mm with the max size of 4.5mm, which helped a little but it's still very noisy.
Can anyone tell me what the most likely problem is?

Thanks






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Valve Noise [200][1991]
posted by  Wolfe111  on Thu May 7 05:19 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.