Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2008 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Need a little tranny help right now! 200

I am currnetly replacing the tranny kickdown cable on my '90 240.I have removed the bushing that holds the filler tube to the tranny but the tube is not coming out.Do I also need to remove the nut that is on the pan?That nut is on there really tight and I'm afraid it may distort the pan on that side.Is there something I'm missing to remove the tube?It is loose but won't slide out.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Need a little tranny help right now! [200]
posted by  Nel621 subscriber  on Sun Jun 14 10:22 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.