Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2005 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Still looking for torque spec: pressure plate to flywheel screws 700

posted by  rstarkie on  Mon Jul 6 11:09 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 10:14 CST 2014
[RELATED]

I am unable to come up with any torque specs for the six 8mm screws that hold the pressure plate to the flywheel on a 1988 744T with the M46od.

A Haynes manual for the later 240 series shows a 17 ftlb spec. These are only a grade 5 bolt.

Does anyone have the spec for this application or does the 17 sound reasonable?

Thanks,

Randy






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Still looking for torque spec: pressure plate to flywheel screws [700]
posted by  rstarkie subscriber  on Mon Jul 6 11:09 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.