Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 9/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

85 240 AC (amount of oil needed?) 200 1985

posted by  blue244 on  Wed Jul 8 13:49 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Aug 5 17:02 CST 2011
[RELATED]

This weekend I plan on getting the AC in my 240 working. The parts I plan to replace are listed below:

evaporator
expansion valve
drier
suction line (evap to compressor)
discharge line (compressor to condensor)
liquid line (drier to evaporator)

I did a lame retrofit some years ago which included a compressor and a drier. I want to be sure that the right amount of oil is added to the system. I plan on removing the compressor and draing the oil. The only part of the system that will not be removed is the condensor. So I plan to add one ounce for the drier, one ounce for the evaporator, and two ounces for the compressor. Does this sound okay?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 85 240 AC (amount of oil needed?) [200][1985]
posted by  blue244  on Wed Jul 8 13:49 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.