Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2005 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

help with vacuum hoses 760 1986 turbo 700

posted by  shrike on  Sat Jul 18 09:27 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Oct 28 11:21 CST 2009
[RELATED]

Hi,
Does anyone have a diagram with vacuum hoses routing. I have a hosethatis free and I am not sure if it should be. I also have a fitting which hasnothing going to it. I will put pictures to explain easier

The hose that has a free end comes from the canister behind the left side headligh. Is this hose ok being free?
It is circled in red in the picture
canister


The hose that has a free end is the 3/8 ID hose that comes from the intake manifold. It is shown with a redline running through it. Close to the bottom of the engine block it enters a fitting which is a T. The middle outlet in the T is not connected. The T is circled in red in the second picture. What should go in that fitting? Thanks

hose

fitting






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New help with vacuum hoses 760 1986 turbo [700]
posted by  shrike  on Sat Jul 18 09:27 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.