Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

engine idles high w/check engine light on 200 1990

I replaced the rear brake light switch (tough job but made easier with help from brickboard). When I reconnected the instrument panel my check engine light is on and the engine idles high. Engine will constantly rev high then low. If I remove the largest connector on instrument panel (black round connector) engine will run normally but I have no instrument panel light, temp gauge, turn signals work but don't display on instrument panel...Good news is my brake lights now work.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New engine idles high w/check engine light on [200][1990]
posted by  scott87  on Sun Jul 26 13:24 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.