Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2007 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

95-960 control arm bushing replacement 900 1995

posted by  dm960 on  Tue Aug 18 05:11 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 06:41 CST 2014
[RELATED]

Finishing up youngest daughters 1st car, 95-964. Going through the search it appears that it's the rear bushing that usually fails. It's obvious that these have gone bad. Does the front bushing hold up better, didn't read much about that bushing going bad as often. And read that the front bushing is more difficult to replace. I've replaced control arm bushings on my old bimmer & they can be stuck in place pretty securely.

Most complete arms I've found are scantech & won't be using them. Ordered parts from eeuro today & asked about bushings & they have Febi. Any tips on pressing these in at home?

Thanks Dave






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 95-960 control arm bushing replacement [900][1995]
posted by  dm960  on Tue Aug 18 05:11 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.