Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2008 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Normal RPM / crank position / impulse sensor voltage in 700 1991

posted by  Allanwayne on  Sun Aug 23 12:03 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Jul 8 15:05 CST 2012
[RELATED]

91 740 turbo with LH 2.4 FI and EZK 116 ignition

I have a cranking engine but no start.
There are no engine fault codes but I'm trying to test the RPM sensor at the bulkhead connector.

Anyone know what the normal pulsing voltage should be?

PS Already confirmed spark, fuel pressure at rail, fuel injector voltage.

thanks.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Normal RPM / crank position / impulse sensor voltage in [700][1991]
posted by  Allanwayne  on Sun Aug 23 12:03 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.