Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

power steering belt 200 1983

posted by  jomarex on  Tue Sep 8 16:41 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Aug 5 11:56 CST 2014
[RELATED]

I found out today that (at least in TX) if the car was manufactured with power steering, in order to pass inspection, it all has to be hooked up and working. I cut the rotten old belt off months ago and decided I like it fine without PS.

Now I can't find, in either of these books or this lovely Brickboard, the detailed instructions I seem to need. I'm too old to just go blundering into it and find out too late that I permanently messed something up, and I don't remember how I probably did it years ago.

How in the heck do I put a new belt on between the front of the crankshaft pulley and the front of the A/C pulley (B23F engine)? I mean how do I get the front of the crankshaft pulley off? There's a 22mm nut in the middle and several small nuts around it and no slots to put a screwdriver in to keep the engine from turning. That darn beer didn't work to get my thinking processes straightened out.

thanks
Joy






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New power steering belt [200][1983]
posted by  jomarex subscriber  on Tue Sep 8 16:41 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.