Volvo RWD S90-V90 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2005 S90-V90 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Seat cushion swap? S90-V90 1998

posted by  sixvolvos on  Sat Sep 26 14:27 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Mar 5 07:57 CST 2013
[RELATED]

Group:
After 11 years and 145K miles the driver seat in my '98 S90 is a bit saggy.
The passenger seat cushion is still OK, which is common.
Can I unbolt the seat assembly from the floor and interchange the cushions?
I did it with a 240 car using a junkyard passenger seat cushion.
Does the wiring just plug in with connectors?
Will the seat assembly come out the door?
It must have been put in at the factory that way.
Can I do the cushion swap with the seat still in the car so as to not have to deal with the belt?
Can I remove the power controls and belt assembly from the seat assembly and leave them in the car?
Can I add something to the top or bottom of the cushion after it is uncovered?

Don't want an add on seat surface.

Thanks,
Sixvolvos






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Seat cushion swap? [S90-V90][1998]
posted by  sixvolvos  on Sat Sep 26 14:27 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.