First the FYI. While reinstalling the front bumper, that I removed about 3 months ago. I found that the front brackets are specific to each side and I hadn't marked them, as they both looked the same. When I went to install them, they both fit and the bumper bolted up, but the bumper was mounted up high and would block the turn signal lights. It took me about 1/2 hour to figure out what the problem was. When removing the front bumper and brackets, MARK THEM drivers or passenges side.
Now for the question, I have a 544 with a b16 engine and the engine seems to run strong, but burns a fairly large amount of oil, so I'm considering over the winter of rebuilding the B16. I've done goggle searches and cannot find anyone that sells B16 engine rebuild kits. Does anyone have a source for a kit. Also is there a site that gives a step by step of how to rebuild the engine and what problems to look for.