Sorry to post another so soon after my previous post but this is a more urgent problem. Since pulling out my center console, the cosmetic stuff and the serious black frame stuff needed to get to my blower and quiet down the ridiculously load bearing noise (thanks to all who helped with that) my turn signals now do not work.

No click at the relay/flasher. No nothing whereas it was working fine before I went into the center console. Just replaced all my fuses in the left side kick box and cleaned the holders up. Replaced the flasher and still no love. Checked out the two front bulbs and they are looking all good.

The only other clue I have is that the emergency flashers do not work either. I was hoping that I had forgot to hook up the flasher switch connection but it is all good (looking at least).

Can anyone think of anyway I could have stopped the turn signals (and flasher) from not working by messing around in that center console in a good faith effort to be able to stand using my heater this winter? I have looked very carefully in there and the only wires I see that are not connected are two yellow wires both with female ends that I do not think are associated with the turn signal or flasher.

Thanks very much,
Jim Lee