Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

No Start - No Power to Pumps 200 1983

I pulled out my motor to replace the transmission. Everything is back in place and hooked up. I'm getting no start due to no power to the fuel pumps. Checked fuse, good. Checked power at fuse, good. Ran jumper and pumps do not run (neither). Checked wiring at the main pump and no voltage when jumped at the relay. Where are the connectors in this wiring that I should be checking? I know the pumps are grounded directly to the chassis, so ground is not the issue.

Thanks,
Phil






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New No Start - No Power to Pumps [200][1983]
posted by  AppleTech  on Mon Oct 5 11:42 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.