Volvo RWD 120-130 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2003 120-130 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Brake line routing 120-130

posted by  TR Conn on  Wed Oct 14 18:27 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 10:32 CST 2014
[RELATED]

Brake lines - Is this normal?
My '67 122S is fitted with a Lockheed brake booster. I am puzzled at the way it is set up.
While the car is set up for the single circuit brakes, it has the dual circuit master cylinder. The front outlet on the MC feeds the brake booster which only applies pressure to the front brakes. The rear outlet on the MC bypasses the booster and operates the rear brakes.
Is this the way Volvo did it? Is this the way dealers did it when installing A/C?
The installation looks professional, though different than any other 122 I've seen.
The Volvo Green Book (older than '67) shows the servo assisted single circuit as applying boosted pressure to all four wheels.

I haven't noticed anything unusual about the way the car stops, but I haven't done any panic stops either.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Brake line routing [120-130]
posted by  TR Conn subscriber  on Wed Oct 14 18:27 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.