Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Wiper Pulley Came of Shaft - Press Fit? 200 1981

posted by  81242DLB21FCA on  Sun Oct 18 12:38 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 22:26 CST 2014
[RELATED]

Hey All,

My driver’s side wiper suddenly stopped in the middle of a heavy rain. A few minutes later the pulley fell out from under the dash. After removing the shaft I find it is apparently just a press fit? The pulley fit on the splined shaft is snug but comes off easily. What is the best way to fix? Loctite, super glue, drill and pin, trip to the PnP?

I have looked at the "Zen of 240 Wiper Linkage" at:
http://www.jimjmorris.com/cvcoa/wipers.htm





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Wiper Pulley Came of Shaft - Press Fit? [200][1981]
posted by  81242DLB21FCA  on Sun Oct 18 12:38 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.