Volvo RWD Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2002

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

GREASE

posted by  RFORT on  Tue Oct 20 08:55 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Aug 3 23:32 CST 2013
[RELATED]

I'm putting new SKF front wheel bearings on the '88 240, and packing them with Pennzoil 707 Premium Red Wheel Bearing Grease.

I'm also putting on new Moog tie-rod ends and ball joints...which have grease zerks and must be lubricated.

Can I put the red Pennzoil grease in the tie-rod ends and ball joints also? The tie-rod ends are dry, but the ball joints seem to be already loaded with some bluish-green looking grease.

Does this really matter?





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New GREASE
posted by  RFORT  on Tue Oct 20 08:55 CST 2009 >
  • New GREASE
    posted by  will rehsper subscriber  on Wed Oct 21 02:11 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.