Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

brake rotor interchange 200

posted by  Marauder03 on  Fri Oct 23 12:40 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Oct 15 21:17 CST 2014
[RELATED]

I have a 1986 245 parts car and a 1992 245 keeper. The '92's front rotors are shot - P.O. ran metal to metal and grooved the LF rotor pretty badly. The '86 keeper has good front rotors. They appear to be same diameter as the '92, but the '86 has solid rotors and the '92 has vented. The vented are thicker. Is it safe/recommended as ok to swap the solid '86 onto the '92? I presume it has to be in a pair, if yes (both front rotors or none at all)?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New brake rotor interchange [200]
posted by  Marauder03  on Fri Oct 23 12:40 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.