Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2009 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Water pump bolts 700 1991

posted by  N7SC on  Mon Nov 16 14:45 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Jul 7 14:12 CST 2013
[RELATED]

As some of you know, I have had a hard time installing a new water pump on my 1991 745 turbo. One of the new bolts has sheared off. And at a torque that was way below the 10 ft-lbs it should have been able to withstand.

I now have two of the new, genuine Volvo, bolts left, and all three of the old, genuine Volvo, bolts. The old ones were only in the car for just over a year. They are noticably different from the new ones. The fact that one of the new ones has sheared off makes me doubt the quality and strength of the two remaining new bolts.

Can I safely reuse the old bolts? They were torqued to 10 or 11 ft-lbs before, and never subject to overheating or anything like that. If I have to buy new bolts, and considering that I don't have faith in the new ones from Volvo, where could I get them?
--
Scott Cook - 1991 745T, 1986 Toyota Tercel (Don't laugh, it is reliable, faithful AND gets 41 mpg!)






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Water pump bolts [700][1991]
posted by  N7SC  on Mon Nov 16 14:45 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.