Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Need sealing ring in dust shield. 200 1989

posted by  vacuumhead on  Fri Nov 20 10:55 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Oct 12 06:49 CST 2014
[RELATED]

Today was the day when the new dust shields, calipers and wheel bearings were finally going to come all together. Unfortunately FCP Groton didn't include this seal with the complete bearing set.This seal fits in the outer two part dust shield behind the inner bearing wheel seal. I should have more thoroughly questioned their response that both the wheel and dust shields seals were included.
Now its the weekend and again I'm unable to complete this job.
Anyone have a clue where I can locate this seal?. Tried Advance Auto but couldn't determine by their computer description if this was the correct one.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Need sealing ring in dust shield. [200][1989]
posted by  vacuumhead  on Fri Nov 20 10:55 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.