Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 9/2009 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Sway Bar Bushing (inner) 200

uid 29404's pic
posted by  punk240 on  Tue Dec 1 07:44 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Jul 14 15:23 CST 2014
[RELATED]

My Turbo Sway Bars have vomited their inner bushings that attach to the U-brackets on the "frame" of the car. The top portion of the bushing is still there, yet it's obviously smashed and hardened from age.

I was wondering what some Brickers have used to cure this matter.

At this time I'm not interested in purchasing a NEW set of rubber for these sways since I have Polys at either end.

Tim
--
'92 244 NOW w/ M47 (Hydra, turbo bars, bilstein, urethane bushings)






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Sway Bar Bushing (inner) [200]
posted by  punk240  on Tue Dec 1 07:44 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.