I've posted a Wanted ad in the classifieds here for this, but someone may be able to help me out who isn't like to peruse the classifieds? Apologies if I'm violating forum protocol.

It's a long, strange story but...

I don't need any of the gauges at all.

Even if all you've got is just the front bezel/frame with the clear plastic window, if it's come loose from the part with the gauge windows. (I don't need the part of the "box" with the gauge windows).

The clear plastic window with the little hole in the lower right-hand corner for the engine service interval re-set button -- I think this appeared in 1989 or 1990? So an instr cluster from 1989 or 1990 to 1993 would be needed.

...In fact, all I'm ultimately after is the window, for a bizarre project/experiment. They're a bear to remove from the rest of the assembly, but this is what I'm attempting to do. Sometimes you get lucky and the epoxy has failed enough to let you pry and X-acto knife the window loose.

I'm only interested if the clear plastic window is in truly excellent condition, and has the RH corner hole. No cracks or chips and no deep scratches. I can polish out light scratches.

If you've got more than one, that's even better.

Please send me a PM if you can help me out with this crazy project.

Thanks.