Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2009 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

AC tubing conectors seized to the tubings, any tricks w/o damage it? 200 1993

posted by  eyyu on  Wed Dec 23 02:55 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Apr 8 14:16 CST 2014
[RELATED]

I'm working on the next item on my list while the car is on stand which is AC rebuild. When I was trying to disconect all the fittings and do the acetone flush, one of the connections is very hard to loosen, where the expansion valve goes into. I finally managed to break the two fittings apart w/o any damage. However, each of the fittings is still stuck to its tubing make it it impossible to turn them and get the two tubings apart. If it were any other part of the AC system, I would just leave it alone. I have to take this apart to replace the orffice (?). anyone has trick? Thanks. Erwin






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New AC tubing conectors seized to the tubings, any tricks w/o damage it? [200][1993]
posted by  eyyu  on Wed Dec 23 02:55 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.