Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2011 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

960 ENGINE REBUILD - top only 900 1992

I am just doing the head gasket, but thought I would post how things are going. Here is a link to my Facebook photos if you're interested...just copy & paste in your favorite browser.

http://www.facebook.com/photo.php?pid=30092642&l=83c6eb9777&id=1008976850

1) Head pressure tested & cleaned. It was already flat, but re-surfaced by .002"
2) New valve stem seals
3) New water pump
4) New oil trap
5) New timing belt (tensioner & pulleys replaced 60K ago) SHOULD I REPLACE?
6) New spark plugs
7) New head bolts
8) REPLACING TORX-HEAD SCREWS on backside of engine with hex-head!!!
9) All new seals and gaskets
10)New filters - oil, air, fuel
11)Switching to full synthetic
12)New thermostat
13)New serpentine belt
--
'01 V70 Wagon, 168K miles...'92 960 Wagon, 196K miles...'92 740 Turbo Wagon, 225K miles (sold)






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 960 ENGINE REBUILD - top only [900][1992]
posted by  Most Unusual  on Fri Feb 5 14:12 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.