Hello All,

You know there's always something to do with these cars.

My high level brake light does not work. Ground is good, but no power. I checked with both right and left brake lights on.

I just want to confirm. In reviewing the wiring diagram, it appears that the power to the high level stop light is fed from a brn/blk wire directly from the bulb out sensor. Although it doesn't show a connector on the wiring diagram, I believe there's a connector below the right or left side hinge (anyone know which side?).

Therefore, I'm assuming my next move is to check that connector, and then head under the dash, first checking the wiring out of the bulb out sensor or possibly replacing it.

Please let me know your thoughts about my approach.

Thanks much,

Marty Wolfson