Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2003 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Torque values and general tips - Front suspension work 900 1997

posted by  DougC on  Wed Feb 10 15:19 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Aug 10 08:30 CST 2014
[RELATED]

1997 960/S90 The badge says S90, but I've been told the 95-98 960/S90 is one and the same.?.?

This weekend I'll be doing control arm bushings, ball joints, as well as front brake pads on the car. Any advice or tips would really be appreciated. I especially need a good source for all the correct torque values below:

Two matching bolts at each caliper.
One other smaller bolt at each caliper.
Front a-arm bushing, one horizontal bolt/nut each side.
Rear a-arm bushing, one vertical bolt each side.
Ball joint to A-arm, one nut each side.
Ball joint to steering arm, two vertical bolts each side.

Thanks for all the help. DougC ::::: 1981 242, IPD bars and Turbo wheels, M46:::::::1984 760, B23FT, M46, waiting to donate engine to 242:::::::1997 S90






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Torque values and general tips - Front suspension work [900][1997]
posted by  DougC  on Wed Feb 10 15:19 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.