Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2002 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

lack of boos with no actuator hose attached 900 1992

posted by  Stasis on  Thu Feb 18 20:48 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Jun 16 02:03 CST 2010
[RELATED]

i wanted to pull the wastegate actuator hose just to see what kind of psi i could get from my 15g i recently installed.

With the 13c i had on there before it would bang on 25 psi with easy with no wastegate hose attached. The 15g however will only go to around 12 psi and hold there even under WOT till red line with teh occasional spike to 15 psi.

my question is what would enable my smaller 13c to hit 25 and the larger 15g to stop at 12? the CBV maybe getin weak? im kind of at a loss to why it wont just spool like a madman like the 13c would.

thanks again

Bryan






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New lack of boos with no actuator hose attached [900][1992]
posted by  Stasis  on Thu Feb 18 20:48 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.