Volvo RWD Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2008

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

oil pressure and temp gauges

posted by  jaydee on  Sun Feb 21 17:11 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 23:45 CST 2014
[RELATED]

I want to install a mechanical oil pressure gauge and temp gauge on my 91 940T, using the left over Smiths gauges I have from my 1800S restoration. Is the oil pressure sender on the B230Ft in the same location as on the B20 and B23? What sort of adapter will I need to plumb in the pressure sender while permitting the functioning of the original 940 sensing equipment?
Also, where should I install a sensor for oil temp? The one on my B30 is in the oil pan, but I don't see a sender in that location on the B230.
TIA
John D






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New oil pressure and temp gauges
posted by  jaydee subscriber  on Sun Feb 21 17:11 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.