Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2013 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Sway bar endlink - suggestions for where to buy heavy duty ones 200 1992

posted by  lucast on  Tue Apr 6 01:45 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Sep 24 00:38 CST 2011
[RELATED]

After bending a stock link that was attached to the right side of the 27mm front sway bar, I decided to try a pair of custom heim links that has worked well for the last 4 months till it started creaking yesterday. Seems that every now and then, the ball on the heim end twists in such a way that it rubs against the short spacers that the bolt to the control arm goes through.

I am persuaded to return to installing a pair of original type links but I am looking for something that's substantially thicker than the stock ones.

Does anyone know where I can source these?

Also, has anyone seen poly bushings for the lower end of the link?

Thanks in advance.

Regards
Lucast






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Sway bar endlink - suggestions for where to buy heavy duty ones [200][1992]
posted by  lucast subscriber  on Tue Apr 6 01:45 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.