|
So I flipped the $25 for a new Odo Gear and it was as expected, a tight fit. Bored it out and everything spun freely. Plugged this all back up and drive around the block... Nothing.
Repeated the entire procedure once more
Nothing
Then I came across Art's website: http://cleanflametrap.com/speedo5/
I can get an 1987 Speedo to flip a needle but my subject car is a 1992 Speedo.
Art addresses there is some confusion about the 92-93 years, but I curious if anyone has rectified this.
My desired result is to hear/see the odometer motor running.
Art... you around?
Tim
--
'92 244 w/ M47 (Hydra, ipd bars and springs, bilstein, urethane bushings)
|