Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 8/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

heater hose replacement 200 1993

posted by  CHBinAsheville on  Tue Apr 27 05:56 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Apr 21 19:56 CST 2012
[RELATED]

I have a 1993 245 and one of the two hoses that go to the firewall has a hole in it. This is my daughter's car and I don't want her driving it without it being well maintained and we have owned Vs for years. I don't think she drove it far after the hose failure to cause a head gasket issue but only time will tell.
My question is do I have to remove the intake to replace both hoses. I had a 1994 945t and managed to replace the one that attaches under the intake without removing the intake. I'm an expert but can do such thins like clutch replacement, complete brake system and most other regular duties. I'm intimidated by this as the only intake I've done was on my 1970 Cougar to replace lifters. Is it possible to get these hose done without the intake removal? When I did the intake on my Cougar I was young fearless............now at 52 I'm paranoid of screwing up my daughter's as we talked her into. Please help!
Curt in Asheville, NC (Obama's get away)
2wild4u@gmx.com






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New heater hose replacement [200][1993]
posted by  CHBinAsheville  on Tue Apr 27 05:56 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.