Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 9/2017 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Exhaust gasket(s) question 200 1993

posted by  cgreene on  Thu Apr 29 03:23 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Nov 24 14:10 CST 2012
[RELATED]

Hello.

I have a putt-putting leak right in front of the converter. I replaced the hardware holding the pipe to the converter in the cold last month to quiet it some, but I need a gasket (or two?), I guess.

I've never done it, but it looks straightforward. Is fitting that ring gasket in there easy? Any hidden pitfalls? FCP only seems to have the ring gasket, but I see another flat jobbie with three holes for the bolts on IDP. I should get both, yes?

Any help is appreciated. Please assume I am an amateur in your response, because I am.

This...

http://www.fcpgroton.com/product-exec/product_id/4656/nm/1990_1993_Volvo_240_Exhaust_Gasket_Converter_Inlet/category_id/130

and this...

http://www.ipdusa.com/version.asp?strPageHistory=category&numSearchStartRecord=0&strParents=69,464&P_ID=2977&CAT_ID=464&V_ID=6847

Thanks in advance!





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Exhaust gasket(s) question [200][1993]
posted by  cgreene  on Thu Apr 29 03:23 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.