Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2011 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Anyone know what part of the clutch fork tends to bend? 200 1983

posted by  transit wind on  Thu Apr 29 11:59 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Aug 15 22:40 CST 2014
[RELATED]

M46 1983 245- doesn't have the weight thing like my 86 on the clutch fork. Instead it has the little rubber piece and a washer with a slit. Any way of telling if this transmission was put in the car from an earlier model with the clutch forks that like to bend.

Ok, my clutch is in constant need of adjustment. I looked at the clutch fork just now from straight below it. It appears to look like the pictures on IPD. It curves some towards the front. My clutch cable is nearing the end of its adjustment and at the same time my second gear was feeling like it wasn't disengaging with the rpms higher than the speed. None of it is making sense at the moment. All because of a scantech cable?







THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Anyone know what part of the clutch fork tends to bend? [200][1983]
posted by  transit wind subscriber  on Thu Apr 29 11:59 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.