Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Best brands and Methods to install Engine Seals 200

posted by  ///revolver on  Mon May 3 16:45 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Aug 4 05:40 CST 2012
[RELATED]

Hello everyone, and thanks for your help in advance.

I am working on a 1991 240.

First, I am considering installing an Elring rear main seal from FCP groton. Is this a VERY BAD idea? Should i get the $35 seal from Tasca?


Relatedly, I have already replaced the front crank and intermediate shaft seals with elring seals. Are these going to leak? Tasca lists these seals for something like $120 each, which is insane.


Last, should I put anything on the OUTER surface of the Rear main seal, or should it be tapped in dry? I am aware that I should oil the inner surface that contacts the cam/crankshaft.

I am just doing the rear main seal in order to fix a leak to sell the car, and I already have the elring seals, but this car is really nice and I hope to sell it and make the new owner happy.

Again thanks so much.

Best,

RRG





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Best brands and Methods to install Engine Seals [200]
posted by  ///revolver  on Mon May 3 16:45 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.