Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2004 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Solenoid O-rings from FCP Groton 900 1993

posted by  jd620 on  Fri May 7 13:06 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 17 07:42 CST 2014
[RELATED]

I bought a 93 wagon at an auction a couple weeks ago and the wiring for the solenoid is ripped out. I pulled the transmission from my 93 parts wagon today which was filthy. I didn't want to pull the solenoid without cleaning around it so pulled it. I plan on putting the solenoid from the parts car in the auction car transmission after pulling it cleaning it up, and replacing the rear engine seal. I was going to order some O-rings from FCP Groton for the solenoid but see they have two sizes, a small p/n 1239834 and a large p/n 1239835. Do I need one of each or ??

Thank you.
--
Mine: 2-940s, 3-740 and 1-940 parts cars, and 3 John Deere 630s, dtr1:3-940s, dtr2:2-740s






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Solenoid O-rings from FCP Groton [900][1993]
posted by  jd620  on Fri May 7 13:06 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.