Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2003 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Lining up wheels on face of cams after rebuilt head 900 1997

posted by  bigdog1056 on  Mon May 10 10:29 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed May 12 16:39 CST 2010
[RELATED]

I just had the head of my '97 960 2.9L rebuilt by a local machine shop and they removed the cam wheels off of the front of the cams. They didn't mark them before removing and I need help lining them up to the cams!I haven't been able to find a repair manual available at a reasonable price which describes the head re-assembly in this sort of detail. The local Volvo dealer says that they just install whole new heads and the cam alignment tool I heard about is $500 so... I am at wits end. Any help out there?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Lining up wheels on face of cams after rebuilt head [900][1997]
posted by  bigdog1056  on Mon May 10 10:29 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.