Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

1-3-3 Code- Throttle Switch Adjusted 200

posted by  LoveMy240Wagon on  Thu Jul 1 02:37 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Dec 31 09:52 CST 2013
[RELATED]

I got a 1-3-3 code so I checked the throttle switch and it is still adjusted (Not sure how this would change) perfectly.

I've been getting all sorts of codes lately that have the accompanying symptoms but then disappear when I disconnect the problem sensor and/or reset the ECU.

So I decided to swap ECU's, still got the 1-3-3.

So I swapped throttle position sensors, adjust the new one and... 1-3-3 code.

In the Bentley manual there is a mention of being shorted to ground but I can't see how that would happen. I've checked over the wiring and it is in excellent shape, nothing shorting to ground unless a couple wires inside the jacket are somehow getting together. Would be an awfully convenient time to happen with all the other codes I'm getting. It seems there is something else going on, starting to suspect general 'electrical gremlins'.

Anyhow, I'm not sure where to go from here, the only symptom I get is a high idle that will drop to normal when I blip the throttle.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1-3-3 Code- Throttle Switch Adjusted [200]
posted by  LoveMy240Wagon  on Thu Jul 1 02:37 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.