Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 9/2011 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Low quality MTC heater control valve 700

posted by  N7SC on  Tue Aug 3 04:59 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Jul 7 14:12 CST 2013
[RELATED]

The cheap and poorly made MTC heater control valve that I got from FCPGroton and installed only about 18 months ago broke apart, which I think could be called a catastrophic failure. The car blew out all its coolant very quickly and overheated.

In the photo below, the bent shaft on the distributor seems to be pointing at the body of the heater control valve. There should be a big nipple on the black plastic part of the valve pointing back at the bent dist shaft, but you'll notice there is not. The big nipple broke completely off of the valve and allowed the coolant to blow out very quickly. Never, never again am I going to use MTC parts. Period.

Bent dist. and broken heater valve
--
1955 Human, Scott; 1991 745 Turbo, Brunhilde; 1990 745GL, Snuggle Bunny






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Low quality MTC heater control valve [700]
posted by  N7SC  on Tue Aug 3 04:59 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.