Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2020 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

A/C Flush Procedure 900

posted by  someone claiming to be 960 Brickster on  Wed Aug 11 14:02 CST 2010 [RELATED]

I am moving ahead with a near complete rebuild of the a/c on my 95 960. There is a new evaporator, compressor, accumulator, and orifice valve, all Volvo or Volvo OEM. I plan to leave the existing condenser as the sniffer did not find leaks in or around it.

I want to be 100% sure not crud is left in the system, but not sure how best to do this. I plan to blow compressed air through the hoses, but I am not sure how to clear the condenser or other lines out. Should it be removed and blown out? Is there a solvent or fluid I should flush with and if so how is the best way?

I will be doing this over the weekend so ideas appreciated here.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New A/C Flush Procedure [900]
posted by  someone claiming to be 960 Brickster  on Wed Aug 11 14:02 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.