Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2007 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Replacing Coolant Temp Sensor 200 1993

posted by  newmex999 on  Sun Aug 22 10:25 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Aug 21 09:05 CST 2014
[RELATED]

CEL is on and pulling a 1-2-3 code, which indicates coolant temp sensor.
I have removed connector and reinstalled, cleared CEL and restarted vehicle and no CEL, that is until car heated up and then CEL came on again.

Is it safe to assume that the sensor is bad?

Can the sensor and/or wires be tested-if so how?

If the sensor is bad, can it be replaced without taking off the manifold?

Thanks much!
--
1993 240, 1992 240GL, 1985 240DL Wagon, 1983 240DL






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Replacing Coolant Temp Sensor [200][1993]
posted by  newmex999 subscriber  on Sun Aug 22 10:25 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.