Volvo RWD 120-130 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2003 120-130 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

advance curves megasquirt edis 120-130

posted by  mopractice on  Sat Aug 28 12:03 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Aug 30 23:57 CST 2010
[RELATED]


HI all
Had issues with the distributor not working properly so I decided to go ahead and install megasquirt with EDIS for spark control. Right now I'm just controlling spark with plans to control fuel in the future.

I have EDIS up and working and now I need to create advance curves in the spark tables within megasquirt. It looks like other owners have been down the same road. Anyone willing to share the spark table with me?

This is a B20 engine with standard cam. From the manuals it looks like advance should be at 10 and going to 36 at load. The car does not like to idle smoothly with 10 degrees, much smoother at 25 degree at idle. I have searched for distibutor curves for the B20 but no luck. Anyone have a link or tips on how to create the spark table. Table is based on manifold pressure and RPM.
Thanks MIKE





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New advance curves megasquirt edis [120-130]
posted by  mopractice  on Sat Aug 28 12:03 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.