Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Flame trap access 200 1993

posted by  Jac912 on  Sat Sep 4 10:59 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Oct 18 10:43 CST 2014
[RELATED]

Not certain of the location of the flame trap. I have the Bentley and recall some discussion here but ....Do I follow a hose back from the air intake side to a where it right angles down to a connection in the middle of the fuel rail?
Can't even see the oil separator below. I have never worked on the pvc system and I have an oil leak somewhere, possibly the valve cover gasket. Didn't think pressure would build up inside the top end ... any ideas and help locating that flame trap would be helpful.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Flame trap access [200][1993]
posted by  Jac912  on Sat Sep 4 10:59 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.