Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Driveshaft rebuild problems.... 200

posted by  JimN696 on  Sat Sep 18 10:18 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon May 6 17:14 CST 2013
[RELATED]

I finished redoing the driveshaft on my '87 with an M47 tranny. Installed new U joints and center bearing. I marked both sides of the shaft and reinstalled it with the marks lining up. The joints seemed slightly stiff, but not binding in any way. The bearing went in without a hitch. The new ride is quiet, but there is a new vibration that occurs between about 50 and 65 mph in both 4th and 5th gear. It is in the seat of the pants, so I'm pretty sure it's coming from the drivetrain. When I reassembled, everything appeared to be in order. Any ideas what to look for? Thanks folks!
--
http://www.facebook.com/#!/album.php?id=1189132524&aid=53563






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Driveshaft rebuild problems.... [200]
posted by  JimN696  on Sat Sep 18 10:18 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.