|
Hi all,
It's a 91 745 N/A with Regina and it's running very well once it warms up, but it has recently decided to become hard to start from cold.
I've cleaned up a bad idle situation with replacing my crank sensor, coil, plugs and wires, as well as replacing the intake gasket and flame trap assembly.
The previous owner replaced the in-tank fuel pump and the ECU about 9 months ago. The difficulty in starting happens with a full or partially full fuel tank.
Do you think the most likely cause is a cracked hose/clogged filter sock inside the fuel pump assembly, the idle control valve not working, the lack of the pre-heat "dryer" hose (which I'll replace this weekend), or something else I'm not thinking of.
Thanks for your help.
Bruce
Grand Rapids MI
82 244 TI, 91 745 N/A
|