Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Help solve the 240 ABS Light Mystery 200 1993

Problem Posted Yesterday: ABS ligth comes and goes after the installation of a new Bosch Brake Booster.

UPDATE --- This morning I went out to the car, started it and no ABS light.
At the suggestion of a member, I disconnected the battery and removed the passenger seat to check the ABS system fuse (10AMP).....the fuse is fine. Reinstalled the seat and took the car for a test drive and everthing seems fine...no ABS light.

When I return home, I let the car idle for a while and still no ABS light.
Finally, I turned the car off and restarted it....arrgh!!! ABS Light is back on!!

Please help with any other suggestions. This all started with the installation of a new brake booster.

By the way, there were two relays near the brake pedal that I had to move around while installing the brake booster...one was a blue plastic box and the other was a white plasit box. They both were held in place by a flat metal spring clip. Does anyone know what these are and could they play a part in this mystery?

I have also wondered if the new booster has simply made an existing problem show up now that the vacuum system is working properly.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Help solve the 240 ABS Light Mystery [200][1993]
posted by  seneker  on Sun Feb 6 08:02 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.