Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2015 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Compressor belt 200 1990

posted by  Onkel Udo II on  Wed Feb 23 05:43 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 08:50 CST 2014
[RELATED]

My new to me 1990 240 DL sedan has a number of minor problems but a few need to be fixed ASAP...like this weekend. Of course my garage was mysteriously filled with stuff in my two years in Iraq so I will be doing this in my driveway...in Chicago...in winter...after not having seen temps below 40F in two years.

The most urgent is the replacing of all the v-belts as the compressor belt broke from age so the others are sure to follow. I have seen a few references to levering this belt on instead of loosening all the pivot bolts including the two only accessed from below. Silly question but is it levered/rolled onto the crank pulley or levered onto the AC pulley? What size is the crank bolt head...I have seen reference to 22MM and 24MM.

The other gotta-do-it-now project is replacing the driver's exterior door handle. I assume it the front an rear handles are the same on the driver's-side and I can temporarily cannibalize the rear handle?

Thanks,

Mike






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Compressor belt [200][1990]
posted by  Onkel Udo II subscriber  on Wed Feb 23 05:43 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.