Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 8/2015 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Machine Shop Near Brooklyn for B230F Headwork 200

posted by  MrNabisco on  Sat Feb 26 19:25 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Oct 22 12:36 CST 2014
[RELATED]

Hi Folks,

I need to find a machine shop to do work to a 531 head. Needs a 3-position valve job and surfacing, etc...

I'm located in Brooklyn, NY and would love to find a Volvo/European speed shop nearby that does good work. Any suggestions?

FYI: The 91 245 M47 LH3 is running at 197k miles with the original head still on but it just started developing a pronounced valve knock. I have a used 531 head that I did a light porting to now I need a machine shop to finish it off so I can do the swap.

Thanks for any tips!

Bert






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Machine Shop Near Brooklyn for B230F Headwork [200]
posted by  MrNabisco  on Sat Feb 26 19:25 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.