Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2006 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

tdc rotor points to #2, timing belt slip? 200 1984

posted by  someone claiming to be townes on  Sat Mar 26 23:38 CST 2011 [RELATED]

So my 84 240 died a couple of months ago. Drove perfectly the night before, my wife got in and drove a half block and it died and hasn't started since. Due to
time issues I haven't been able to check it out until now.
It's getting spark and fuel. When #1 is at top dead center and all and everything is lined up the rotor does not point to #1, and it's not out 180% (exhaust stroke). It's more like it's pointing to #2. I'm assuming the timing belt slipped.
The belt is not broken, the rotor and cam are moving. I had a similar issue about a year ago but never really got a straight answer from my mechanic that I no longer will be using due to a recent poor experience. He said at the time that the distributor was frozen but I'm not sure if that was in fact true.
I do most things myself but have yet to tackle a timing belt.
Any input would be greatly appreciated.

Thanks, Kirk S.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New tdc rotor points to #2, timing belt slip? [200][1984]
posted by  someone claiming to be townes  on Sat Mar 26 23:38 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.