Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Recently replaced control arm bushings and O2 sensor if you have Q's 200 1990

posted by  hotcrowd on  Sun Mar 27 13:51 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Feb 1 08:54 CST 2013
[RELATED]

Hey everyone!
It's been a while since I posted.
Hope you all are well.
I Recently replaced the control arm bushings and O2 sensor
on my 1990 240 wagon. This work improved the handling and
fuel economy. Got the O2 sensor for $75 off ebay. Same Volvo
part # as original. The bushing are Lemforder, made in Germany.
Didn't need a press or special tools to my surprise and delight.
I used only a small bench vise.
Hope to tackle the rear Trailing Arm Bushings next.

I live in Knoxville and would love to meet with fellow Volvo 240 owners to talk shop and work on each others cars.

Thanks

Brandon Hughes






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Recently replaced control arm bushings and O2 sensor if you have Q's [200][1990]
posted by  hotcrowd  on Sun Mar 27 13:51 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.