Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2010 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Dumb strut question. 200 1986

posted by  wolf_walker on  Wed Mar 30 21:42 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Aug 11 19:29 CST 2012
[RELATED]

This has become a debacle in typical old car fashion.
Replacing the struts(and shocks, and brakes) on this 86 as a final touch
since it's proved it isn't going to blow up or quit shifting. The drivers side strut mount was as stuck as anything I've ever seen to the strut shaft. I removed the gland nut to pull the thing out finally and took it to work and had one of my guys get it apart, told him I wanted the spring plate. Didn't occur to me there might be a spacer washer in there below the spring plate (or him I guess).

That is the question, was there in fact a spacer washer under the spring plate?

It's going to need one either there or under the strut nut on top, this is with current Sachs Advantage PN 100597 and KYB boot kits. The boot kit seems alright, I don't like that the accordion is so much larger than the strut body I can't secure it snug with a zip tie like I always have before though.





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Dumb strut question. [200][1986]
posted by  wolf_walker  on Wed Mar 30 21:42 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.