Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

has anybody used the hose ipd sells to join the in tank fuel pump to the sender 200

posted by  oldduke on  Sat Apr 9 20:17 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Feb 2 13:04 CST 2014
[RELATED]

hi sages- couldnt find any 30R10 submersible fuel hose needed tojoin the in tank fuel pump to the outflow pipe on the sender. have new replacement units for my 92 240. received the 3 inch hose from ipd. cautions in the forum warn against using anything but 30R10 rated hose which is fuel resistant on the outside as well as the inside. ipd says their hose is good for this but they cant tell me for sure. dont want to do this job all over a 2d time if the hose deteriorates early. to order the hose from gates or volvo is very expensive. anybody have any direct experience with the ipd hose? only printing on the ipd hose says usa and ais. also what clamps do you recommend for securing this hose to the pump and outflow pipe( standard ring gear types)?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1 has anybody used the hose ipd sells to join the in tank fuel pump to the sender [200]
posted by  oldduke  on Sat Apr 9 20:17 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.